Rank: Driver's Permit
#1 Posted : Friday, January 29, 2021 6:17:18 AM(UTC)
Hi
From 4 days!!! I am trying setup my TX in game and it still unplayable.I tried so many configurations but cars are still "go crazy" on corners

I was starting configure from 2 "diffrent" videos :
https://www.youtube.com/...mp;ab_channel=MuddyGamer
https://www.youtube.com/...p;ab_channel=Steeboohken

and later "calibrate" for me but I still can't find good configuration

Can You send my yours configuration?

P.S
I have also starange problem :Once when I launch FM7 i can setup WHEEL ROTATION on:320,350,380.....710,740...degrees but not on 360...or 720....why?

Edited by user Saturday, January 30, 2021 6:18:03 AM(UTC)  | Reason: Not specified

Rank: B-Class Racing License
#2 Posted : Monday, February 1, 2021 2:58:11 PM(UTC)
Make sure the wheel is up to date firmware wise, then try this:

https://i1.wp.com/www.xb...uveau-force-feedback.jpg

Rank: Driver's Permit
#3 Posted : Friday, February 5, 2021 4:32:59 AM(UTC)
Originally Posted by: X3R Monkey Go to Quoted Post
Make sure the wheel is up to date firmware wise, then try this:

https://i1.wp.com/www.xb...uveau-force-feedback.jpg



Drivers were updated maybe week ago.On this settings is little bit better

HMMM...one answer after week.....and SimGame unplayable on RacingWheel.....

Never XBOX more!!!!!!
Rank: Driver's Permit
#4 Posted : Friday, February 5, 2021 5:10:56 AM(UTC)
https://ibb.co/ccTSVKZ

hmm I have more options ....
Rank: Driver's Permit
#5 Posted : Monday, February 8, 2021 7:37:13 AM(UTC)
Hi BittererOhio91,

I'm using the Logitech G923 instead of the Thrustmaster, but like you had to fiddle and tweak with the settings to make the cars contollable. I've found that so far the below settings work best for me:

All deadzone insides are set to 0 except decelaration, that's set to 5.
Steering and acceleration and decelaration deadzones outside are set to 80.
Clutch deadzone outside is set to 70.

Vibration scale = 40
Force Feedback Scale = 100
Aligning Torque = 150
Mechanical Trail = 100
Pneumatic Trail = 120
Road Feel Scale = 80
Load Sensitivity = 100
Wheel Damper Scale = 100
Center Spring Scale = 20
Dynamic Damper Behavior = 50
Wheel Rotation Angle = 460
Steering Linearity = 45

I hope these settings will work for you as well, or at the very least give you a solid starting point to tweak to your personal preferance.
Rank: Driver's Permit
#6 Posted : Wednesday, February 10, 2021 6:43:39 AM(UTC)
Originally Posted by: Deamon4 Go to Quoted Post
Hi BittererOhio91,

I'm using the Logitech G923 instead of the Thrustmaster, but like you had to fiddle and tweak with the settings to make the cars contollable. I've found that so far the below settings work best for me:


Yeah..little bit better

It is very irritating.I made FM6 and FM7 on 50% on gamepad one year ago and waiting for rest when I will buy wheel......and now "feeling" with racing weel are AWFUL...
Rank: Driver's Permit
#7 Posted : Tuesday, March 23, 2021 5:32:10 AM(UTC)
16 millions players!!!......And no one fully help me
Yeah,I understand that "polish setting verison" is other than rest but....
Congratulations Forza Community!!!!
Rank: Driver's Permit
#8 Posted : Friday, April 2, 2021 7:56:29 PM(UTC)
I have a TX servo with the Sparco R383 and T3PA pedals. All of the built-in layouts reverse my gas and clutch. I wonder if I'd have your steering issues if my pedals worked.

I have the same pedal problem in WRC 9, but you can button bind manually so I can switch the pedals around.
Rank: Driver's Permit
#9 Posted : Wednesday, April 7, 2021 1:52:29 AM(UTC)
Salut à toutes et à tous .. le sujet réglage volants dans FM7 & FM4. .
Veuillez ajouter mon GT / Xbox one séries X ( ANNABI233)
Faite moi une demande à sujet réglage volant dans le jeu Mentionné, ensuite je vous ajoute ensuite je vous explique les réglages est leurs impacts à fin que vous aurez une compréhension général . Comme ça je vous guide à trouver votre Mélody qui vous correspond selon votre profile de pilotage . Allez a bientôt .

Notification

Icon
Error