Originally Posted by: LoneRangerRides 
Originally Posted by: Dan the Dartman 
Originally Posted by: LoneRangerRides 
So I just installed the update (Xbox, Fanatec P1 wheel, V2.5 Base) and after hoping that the FFB system would be fixed I am overwhelmingly disappointed. Force Feed Back is strong going down a straight section of track but the wheel is still "twitching" left and right and as soon a you enter a turn the FFB goes to zero. There is no improvement. Looks like I'll be driving Forza 6 until the next update because this one is a loser for Fanatec wheel users.
What are your settings both in game and on the wheel?
I can set up my game and wheel to whatever you have and see what you are talking about. It will also give me an idea of how strong of a wheel you are looking for to compare with my set up. Perhaps I can find you a decent middle ground. Nothing personal but I there are several ways to get the feel you want and some combinations have side effects that get magnified if not balenced especially when you add in the additional settings that the Fanatec wheel offer.
Thanks. What platform are you on, what wheel are you using and what base?
Advanced Game Settings: Default except Wheel Rotation set at 750 like on wheel and FFB set to 30.
Wheel Settings:
Sen - 750
FF - 035
SHO - 100
Abs - OFF
dri - Off
brf - 030
FEI - 100
Ok now that you have your settings posted so you can go back to them if you want.
I have an Xbox One X
Fanatec V2 wheel base...universal rim.
Please change everything on your wheel and in game to what I give you and tell me what you feel after you try it out for a few races and a few different cars.
On your wheel...
Sen...720
FFB...15
Sho...off
Abs...off is ok ( mine is at 67 but this is all preference )
DrI...off
BrF...30 ( I recently went to 40 with this.)
FEI...not sure what this is as I have an older firmware update without this. ( Maybe someone can post a response ) or try Off and on and see if it's noticed.
I use Sim steering but you may prefer Normal here as with other assists applied.
I use No traction or stability or Abs....all off
Manual but without clutch mostly
Now in game...
Vibration...25
FFB scale..200.... ( I know this works on a Fanatec but in case someone with a different make wheel tries this may be pretty strong for the wheels motor so be cautious )
Aligning torque scale...66
Mechanical trail scale...155
Pneumatic trail scale...109
Road feel scale...6
Wheel damper...9
Center spring...0
Wheel rotation...720
Steering linearity...50
*** in theory our wheels should feel at least similar now.
Now if this feels strong for you lower the FFB 1 number at a time to 14 ( you should have this at 15 already from my settings above for the wheel ) and try driving then treat if needed lowering it to 13. Leave all the game settings the same and only change the wheel FFB.
Your Fanatec should have 5 presets so I set them all the same as memtioned up top except my FFB and that I set as follows...this is 100% optional though
Preset 5.....FFB...17
Preset 4.....FFB...16
Preset 3.....FFB...15. ( this is my most used ) wheel too heavy ...just 1 setting down ( to light 1 setting up to preset 4 and that I can change on the fly without even stopping the race.
Preset 2.....FFB...14
Preset 1......FFB...13
***every other setting on the wheel or in the game stay the same but this FFB setting change and this should adjust the feel for lighter and heavier cars.****
Try this and let me know....if you don't like it you can always go back to what you had listed above. If you do go back try lowering or even better turning off the SHO.
Edited by user Tuesday, February 5, 2019 9:06:58 PM(UTC)
| Reason: Not specified